How would I go about making this? This object will be made…
0 reactions
How would I go about making this?
This object will be made from 18ga mild steel. Now the flat face with the holes, is about 7" x 7". The vertical walls are about 15mm tall, then the top border peice is about 24mm wide.
Am I best to cut seperate peices (cnc or water jet) and just tack welds until its all one piece, such as one might do with autobody? Or should I bend these from a larger panel with like a bead roller?
The flat face needs to stay flat, no warpage ideally.
I have a decent mig welder, I can glue metal together but I am no metalworker.
Thanks
#industry
This object will be made from 18ga mild steel. Now the flat face with the holes, is about 7" x 7". The vertical walls are about 15mm tall, then the top border peice is about 24mm wide.
Am I best to cut seperate peices (cnc or water jet) and just tack welds until its all one piece, such as one might do with autobody? Or should I bend these from a larger panel with like a bead roller?
The flat face needs to stay flat, no warpage ideally.
I have a decent mig welder, I can glue metal together but I am no metalworker.
Thanks
#industry
| 4,000 mlx | |
| 4 | |
| 0 |